How to clean a Dyson canister vacuum is a frequently asked question. While the answer might seem simple, it depends on which type of model you have and what kind of dirt and debris you’re trying to clean up.
It is essential to clean a Dyson vacuum canister regularly to keep it running correctly and prevent dust or dirt accumulation. Whether you want to know how to clean your Dyson canister vacuum or how to keep it in good condition, we’ll provide some helpful tips. Keep reading to learn how to clean a Dyson canister vacuum.
What You Need
- Scissors or knife
- Portable vacuum brush with hose attachment
- Old toothbrush
- To remove larger debris, use your hand instead of a meeting
- A can of compressed air or air compressor
- Flathead screwdriver
Step by Step Guide on How to Clean Dyson Vacuums
1. Empty the Canister
The first step in cleaning a Dyson canister vacuum is to empty the canister or clear the bin. To do this, hold the vacuum cleaner over a trash bin and press the release button to dump the dirt and debris out. If there is any caked-on dirt or debris, use a brush or your hand to remove it.
2. Remove the Foam Filter
The foam filter is typically located at the bottom of the canister. Pull on it to remove it. Some models have two Dyson filters; one is made of foam, and the other is pleated paper. Remove both filters and set them aside for later cleaning – see ‘How to Clean Dyson Canister Filter‘ post.
3. Remove the Roller Cover
The roller cover is the metal ring located around the brush. If you have a Dyson canister vacuum that uses a cord, you’ll need to unplug it before removing the roller cover. Each type of model has different instructions for removing this piece.
You may need to use your fingers or pliers to get under the edge and pull it up. Once you have removed the roller cover, remove any hair or string wrapped around the brush.
4. Use the Compressor / Compressed Air
If you have a can of compressed air or an air compressor, you can use it to clean the dirt and debris out of the vacuum cleaner. Insert the nozzle into the hose attachment and spray until the dirt is gone. If you don’t have access to a compressor, you can use a water hose to do this same job.
Cleaning the Canister
When removing the canister, be sure to unplug your vacuum cleaner. You can then use a damp microfiber cloth or paper towel to wipe away any dirt on the outside of the vacuum cleaner. If there is any debris build-up around the motor or in other hard-to-reach places, you can use a screwdriver to remove it and then brush it off with a toothbrush.
Finally, reattach the dust canister and plug in your vacuum cleaner. Rinse the foam filters and pleated paper filter in warm water. Allow them to air dry before replacing them in the vacuum cleaner. Replace the roller cover and put the screws back in place.
Cleaning the Dyson Canister Filter
As with any vacuum cleaner, you should replace the filter regularly. However, if your filter is very dirty or clogged, it will need to be cleaned before you can put in a new one. To do this:
- Remove the filter and use cold water to wet it entirely so that no spots are left dry.
- Place it into a cup or bowl of cool water and let it soak for two minutes. If there are any debris build-ups on the filter, you can scrub them off with a toothbrush.
- Wash filters and allow them to air dry until they are completely dry
- Rinse the filter thoroughly so that no soap remains, and then pat dry with a paper towel or cloth before reattaching the clean Dyson filter to the vacuum cleaner.
Cleaning the Hose
If the hose becomes clogged or dirty, you can clean it by detaching it from the vacuum cleaner and using a vacuum cleaner brush with a hose attachment. Be sure to check for any debris build-up around the motor or in other hard-to-reach places. Finally, reattach the hose and test your vacuum by vacuuming some dirt and debris.
Cleaning the Brush Roll
You should clean the brush roll if it becomes tangled or makes a loud noise. To do this, you will need to detach the brush from the vacuum cleaner and use scissors to cut away any tangled fibers.
If there are any debris clogs around the drive motor, use a screwdriver to remove them and then brush them off with a toothbrush. Finally, reattach the brush and test your vacuum by vacuuming some dirt.
Cleaning the Exterior
If your vacuum cleaner starts to make strange noises or smells bad, the exterior of the vacuum needs some cleaning. To do this, you will need to unplug your vacuum and remove all attachments.
Next, use a damp cloth to wipe away any dirt from the outside of the vacuum cleaner. If there is any debris build-up around the motor or in other hard-to-reach places, you can use a screwdriver to remove it and then brush it off with a toothbrush.
How Do You Take Apart a Dyson Canister?
There are a few simple steps that you will need to follow to clean it out. The different parts of this type of vacuum are contained within the central unit.
To take apart your Dyson canister vacuum:
- Unplug it from the wall.
- Remove the attachments, such as the hose and wand, the extension tube, and the attached tools.
- Turn your vacuum onto its side so you can access all of the parts more easily. You might need to prop up one end with a book or other object.
- Locate the four screws at the bottom of the vacuum and remove them.
- Carefully separate the top cover from the bottom half of the vacuum cleaner and set it aside.
- Remove the cyclone assembly by unscrewing it in a counterclockwise motion.
- Remove the filter from the cyclone.
How to Prolong the Life of Your Dyson Vacuum
The best way to prolong the life of your Dyson vacuum is to maintain it by cleaning and replacing parts as needed. The only parts that should need replacing are the filters and the belt. It is a good idea to check your manual for a more detailed list of replacement guidelines.
You must insert the pod into the canister by sliding it into place until it clicks. It ensures a secure connection between the handle and the carousel, so don’t pull it apart to clean anything inside. Do not attempt to force the pod into place if you have trouble with this. Instead, contact Dyson for repair or replacement services.
How Often Should I Clean My Dyson Canister Vacuum?
It is a good idea to clean your vacuum at least once per week. However, you should also clean it more frequently if your vacuum is used in dusty or dirty areas. If you go through several dirtbags every month or if the bag fills up quickly, then you will need to clean it at least once per month. If there are any restrictions on how often you can clean your vacuum, consult your user’s manual.
How to Deep Clean a Dyson Vacuum
There may come a time when your Dyson vacuum needs a more in-depth cleaning. To deep clean it, you will need to remove the dustbin or canister and all attachments. You can then use a vacuum cleaner brush with a hose attachment to clean the dirt from the brushes. Be sure to check for any debris build-up around the motor or in other hard-to-reach places. Finally, reattach the dustbin or canister and test your vacuum by vacuuming some dirt and debris.
Maintenance of Dyson Vacuum
Dyson vacuums are very durable machines. If well maintained, it will last many years before you purchase a new one. To keep your device working well, you should perform regular maintenance.
For example, clean out the Dyson vacuum filter every three months and replace the belt every year. You should also keep the cord away from doors, pets, and any high-traffic areas to prevent it from getting damaged. When you use your vacuum, store it in a cool, dry room.
Q. Can the Dyson canister be washed?
Yes. You can wash it, though Dyson recommends not to use detergents. It can be cleaned with a damp cloth and some water.
Q. How do you take apart a Dyson canister?
You can take apart a Dyson canister by removing the dustbin, motor, filters, and cyclone with attachments.
Q. How often should you clean a Dyson vacuum?
It is good to clean your Dyson vacuum cleaner at least once per week, but more frequently if your home is dusty or dirty. Keep in mind that the filters need changing every three months, and the belt needs replacing about every year.
Q. Can I wash the cyclone part of my Dyson vacuum?
Yes. You can use a damp cloth to wipe it down. However, you should not use any detergents. If there is any debris build-up around the motor or in other hard-to-reach places, you can use a screwdriver to remove it and then brush it off with a toothbrush.
Cleaning your Dyson vacuum is an essential part of its upkeep. It ensures that your appliance functions properly and will last a long time. There are several cleaning methods for this type of vacuum, so you can choose which one best suits your needs. Be sure to consult your user’s manual for more specific cleaning instructions.